|
THERMAL UNITS
Download as PDF
SPECIFICATION DETAILS:
Agent Container. The generator housing shall be constructed of exterior
and interior steel shells separated by an insulating material. Exterior shell
shall be stainless steel. Top and bottom of housing shall be stainless steel
and incorporate a fitting to enable direct connection to a Thermal Actuator.
Housing shall be sealed with a non-permeable membrane and shall be nonpressurized
prior to system activation.
Finish. Brushed Stainless Steel.
Aerosol Agent. Aerosol generated shall be potassium based and
manufacturer shall provide fifteen (15) minute time weighted average data
from an independent United States laboratory demonstrating that the
aerosol does not produce (at normal design concentrations) harmful levels of
CO, CO2, and NOx based on NIOSH standards. Agent shall have no ozone
depletion potential and no global warming potential. Agent shall be approved
for commercial sale by the US EPA.
Thermal Actuator. Unit shall be activated by means of a thermal actuation
device rated 70°C, 95°C, or 123°C. Actuator shall be anodized aluminum or
stainless steel and shall be capable of both thermal and/or manual
activation.
|
